Advertise with us
Estimating Sheet

Live demonstration of lift reinforcement in a construction site

Construction Software

This is a very useful video tutorial for civil and structural engineers. In this video, the step-by-step processes are provided for constructing lift reinforcement at the job site. Besides, explanation is also given to arrange the steel bars as well as the beams over the opening of the lift.

Generally 12 mm steel bars should be used with 4 inches center to center spacing. The spacing should be identical for main bars and distribution bars.

20 mm steel bars should be used from below to build up the columns. The diameter of the stirrups should be 10 mm. There should be two masses for lift reinforcement. The diameter of both should be same.

Watch the following construction video to watch the live demonstration of lift construction.

Video Source: F&U-FORYOU

Live demonstration of lift reinforcement in a construction site